Loading...
Work Restraint lanyards prevent the user reaching a fall hazard zone. A standard safety harness and restraint lanyard make a compliant system when connected to an approved anchorage point. The standard for a lanyard is EN354. These lanyard must never exceed 2M in length.
Work restraint should be given priority over fall arrest systems. However a guard rail such as our "Roof Angel" free standing guard rail provides collective protection.
Work Restraint lanyards prevent the user reaching a fall hazard zone. A standard safety harness and restraint lanyard make a compliant system when connected to an approved anchorage point. The standard for a lanyard is EN354. These lanyard must never exceed 2M in length.
Work restraint should be given priority over fall arrest systems. However a guard rail such as our "Roof Angel" free standing guard rail provides collective protection.
Restraint Lanyard - Kernmantle Rope Length : 1.0 M- Without connectors Breaking strength : 22 kN Conforms to : EN354:2002 Restraint Lanyard - Kernmantle Rope...
Adjustable lanyard with steel single buckle and textile handle which allows adjusting a length under the tension. strong and resistant 25 mm wide webbing eye with a protector for any EN 362 connector big steel buckle for adjusting a length of the lanyard Adjustable lanyard with steel single...
Two-layer sewed sling with eye and wear indicator outer hollow webbing protects inner red load bearing strap in case of outer webbing damage the user is immediately advised on danger and hazard connected with further use by seeing the red colour of inner strap Two-layer sewed sling with eye and...
Two-layer webbing with sewed eyes outer hollow webbing protects inner red load bearing strap in case of outer webbing damage the user is immediately advised on danger and hazard connected with further use by seeing the red colour of inner strap SLING LANYARD has to be used as a component of a fall arrest system the lanyard is tested to EN 354 for... Two-layer webbing with sewed eyes...
Non-adjustable dynamic rope lanyard - EN354 Non-adjustable dynamic rope lanyard combines with an ABSORBICA energy absorber to create an I or Y energy-absorbing lanyard that helps hold the connector in position, with abrasion protection for the ends Non-adjustable dynamic rope lanyard -...
adjustable length terminated with steel D-rings Color: whiteWeight: 350 gMaterial: high tenacity PADStrength: 22 kNWidth: 44 mmLength: 80 - 130 cm (31 - 51 in) EN354 EN358 EN795B adjustable length terminated with...
This is an adjustable lanyard 0.1 - 2 M Complies with EN 358 This is an adjustable lanyard 0.1 - 2...
Adjustable Lanyard for restraint and MEWP use. Comes complete with safety hooks. Adjustable Lanyard for restraint and...
Restraint Lanyard ideal for MEWP 1.5M Snap hook and Scaffold Hook included. Restraint Lanyard ideal for MEWP...
A restraint lanyard is used to restrict the worker's movement to prevent him reaching a location where a fall hazard exists. Ideal for MEWP etc. Lenght 1.5 metres Conforms to EN354 A restraint lanyard is used to...
Adjustable progression lanyard Adjustable progression lanyard allows continuous connection during all types of progression (rope ascent, traverse on a safety line...). Thanks to the ADJUST rope adjuster, the length of the adjustable arm can be quickly and easily adjusted. The connectors are held in the correct position for ease of clipping Adjustable progression lanyard...
Fall arrester that follows the user in both directions safe and simple to use with one hand it can be used as a positioning device or locking device by shifting the special buton on the lock mode supports the strongest stress in semi-dynamic way and it avoids the shock effects on the ropes caused by the traditional self-locking devices connector... Fall arrester that follows the user...